SLT Usage

These instructions are for operating a single line telephone on the NEC Ranger AK system.

Answering a Call

  • Receive Ringing
  • Lift Handset
  • Converse

Call Transfer – Announced

You can use the transfer function to transfer a call to another telephone. To transfer an announced call, do the following

  • Press RECALL. Call is placed on Exclusive/Consultation hold.
  • Dial the extension number where the call is being transferred
  • When the call is answered, announce the call and restore the handset
  • Call is transferred

Call Transfer – Ring Transfer

You can use the transfer function to transfer a call to another telephone. To transfer a call using the Ring Transfer method, do the following

  • Press RECALL. Call is placed on Exclusive/Consultation hold.
  • Dial the extension number where the call is being transferred
  • Press RECALL
  • Call is transferred

Placing a Call on Hold

You can place both internal and external calls on hold. Internal calls placed on hold will hear silence whereas external calls will hear music on hold from your music source.

To place a call on hold, do the following:

  • Press RECALL. Call is placed on Exclusive/Consultation hold. Do NOT hang up!
  • Press RECALL to retrieve the held call

Placing an Internal Call

To place an internal call, do the following:

  • Lift the handset
  • Dial the desired station number
  • Talk when called party answers

Placing an Outside Call

Manual Dialing

  • Lift handset and receive dial tone
  • Dial line access code (usually 9
  • Dial number for outside party
  • Converse when called party answers

Speed Dialing

  • Lift handset and receive dial tone
  • Dial * followed by the two digit speed dial number (00-19 for station speed dial, 20-99 for system speed dial).
  • Talk when called party answers

Redial

You can redial the last external number called by doing the following:

  • Lift handset and receive dial tone
  • Dial # for redial
  • Converse when called party answers